LATEST NEWS FROM INDUSTRY
Tuesday’s marvels of engineering: Empire State Building
The Empire State Building is a 102-story Art Deco skyscraper in Midtown Manhattan, New York City. It was designed by Shreve, Lamb & Harmon and completed in 1931. The building has a...
Cooperation of Okuma and Dr. Kaiser Diamantwerkzeuge
Okuma and German grinding expert Dr. Kaiser Diamantwerkzeuge GmbH & Co KG jointly developed a grinding system that offers cutting-edge dressing functions....
Exclusive interview – DMG MORI presents Lasertec 30 SLM
DMG MORI Lasertec 30 SLM 2nd Generation Offers Open Parameters.
We've talked in exclusive video interview with Mr. Ralph Rösing, managing director with...
Tuesday’s marvels of engineering: Hoover Dam
Hoover Dam, formerly called Boulder Dam, dam in Black Canyon on the Colorado River, at the Arizona-Nevada border, U.S. Constructed between 1930 and 1936, it is the highest concrete arch...
HANNOVER MESSE 2020
Industry 4.0 and digitalization are transforming all sectors of the economy, including logistics, where once tried and proven material flow models are...
Global Steel Output Flat, with One Exception
September global output of raw steel slipped to 151.5 million metric tons, -2.42% from August, but essentially even with September 2018. Global...
Tuesday’s marvels of engineering: Langeled Pipeline
The 1,166 km Langeled Pipeline has helped Norway and Britain to scale new heights with regard to their oil and gas export...
Tuesday’s marvels of engineering: Channel Tunnel
Channel Tunnel, also called Eurotunnel, rail tunnel between England and France that runs beneath the English Channel.
The Channel Tunnel, 31 miles (50 km) long, consists of three tunnels: two for...
At K 2019, the ‘top priority is sustainability’
DUESSELDORF, Germany — European plastics and rubber leaders kicked off K 2019 by acknowledging plastics' role in the waste problem and pledging...
INDUSTRY & MANUFACTURING
Manufacturing
Declining Demand, Instability Forecast for Automotive Tooling
Changing automotive marketplace and fewer vehicle launches are driving reduced regional spending by automakers.
A newly released analysis of the automotive-vendor tooling sector...
Video
Exclusive interview – DMG MORI presents Lasertec 30 SLM
DMG MORI Lasertec 30 SLM 2nd Generation Offers Open Parameters.
We've talked in exclusive video interview with Mr. Ralph Rösing, managing director with...
Tuesday's marvels of engineering
Tuesday’s marvels of engineering: Hoover Dam
Hoover Dam, formerly called Boulder Dam, dam in Black Canyon on the Colorado River, at the Arizona-Nevada border, U.S. Constructed between 1930 and 1936, it is the highest concrete arch...
HANNOVER MESSE 2020
Industry 4.0 and digitalization are transforming all sectors of the economy, including logistics, where once tried and proven material flow models are...
Global Steel Output Flat, with One Exception
September global output of raw steel slipped to 151.5 million metric tons, -2.42% from August, but essentially even with September 2018. Global...
Tuesday’s marvels of engineering: Langeled Pipeline
The 1,166 km Langeled Pipeline has helped Norway and Britain to scale new heights with regard to their oil and gas export...
High-efficiency grinding
Performance. Precision. Reliability. Affordability: These are the driving forces behind the design of our new FMG-B1224 Traveling Column High-Efficiency Profile Grinding Machine...
Tuesday’s marvels of engineering: Channel Tunnel
Channel Tunnel, also called Eurotunnel, rail tunnel between England and France that runs beneath the English Channel.
The Channel Tunnel, 31 miles (50 km) long, consists of three tunnels: two for...
At K 2019, the ‘top priority is sustainability’
DUESSELDORF, Germany — European plastics and rubber leaders kicked off K 2019 by acknowledging plastics' role in the waste problem and pledging...
PARTNERS
MACHINES AND TOOLS
New Horn tool geometry allows multi-functional machining
A variant of Horn’s Supermini precision tooling system has been introduced with new HP geometry, allowing higher infeed rates and other cutting parameters.
It also enables multi-functional use on a lathe across a range of operations including drilling,...
Proven performance in a smaller footprint
The shorter travels and compact footprints of the Haas UMC-500 Series universal machining centres (UMC) make them ideal for 3+2 machining and simultaneous 5-axis machining of smaller parts.
The 5-axis UMC-500 offers the same proven performance as Haas’...
Milltronics Introduces Largest XP-Series VMC
Milltronics USA’s VM8434XP vertical machining center is built with linear cross roller guides for rigidity, direct-coupled ballscrews for faster response, and a dual-wound spindle motor for faster acceleration/deceleration as well as added torque.
The 35-hp machine also includes a heavy-duty...
Niagara Cutter ST540 from Seco
Seco Tools has expanded Niagara Cutter’s Stabilizer product line with the five-flute ST540 end mill designed to increase performance and versatility.
The STS540, STSN540, STR540, STRN540 and STRCS540 solid carbide end mills together are said to provide a...
Partners
New medical-grade 3D printer
3D printing technology company B9Creations (Rapid City, SD) recently announced the launch of its additive manufacturing Healthcare Division & Service Bureau and...
Parts designed in CATIA V5 can now go straight to a 3D printer
Over the last three years, the international consortium made up of nine partners has succeeded in developing more resource-efficient production processes for...
Altair Inspire Render for optimized 3D modeling
Altair, a Michigan-based cloud solutions and software provider, has launched a new 3D design and rendering platform, Altair Inspire Studio.
A 3D rendering...
The rising wave of industrial sensors
The demand for industrial sensors is expected to grow significantly with the rise of advanced automation, smart factories, artificial intelligence and IIOT...
Fanuc launches new IIoT platform in Europe
European launch of the Field system, a new IIoT platform has been carried out by Fanuc at the recently concluded EMO Hannover...
Rockwell Automation introduces ArmorStart ST
Rockwell Automation’s Allen-Bradley ArmorStart ST distributed motor controllers with integrated safety can be mounted directly on a machine, allowing users to implement...
